< 規 格 一 > Type Bronze Brass Fe Fe-Cu Fe-C MPIF MPIF MPIF MPIF MPIF Fe-Cu-C MPIF MPIF FC-0205 -80HT SINT C11HT SMF MPIF Fe-Cu-Ni-C MPIF FD-0205 -105HT SINT D39HT SMF MPIF Cu Infiltrate MPIF ComparativeSpecifications(std) CT-1000 CZP-2002 F-0000 FC-0200 F-0008 FC-0205 SINT D00 SMF 1015 ● – bal – – – – – – < 1.0 SINT C01 SMF 3030 ● – bal SINT C11 SMF FD-0205 FD-0405 FX-1008 DIN CODE SINT A50 - SBK 1218 – ● – – bal 8~11 – – – < 1.0 SINT B10 SBF 2118 ● ● bal – 2.0 – – - – < 1.0 SINT D39 SMF SINT D30 SMF 5040 ● – bal - JIS CODE Machine parts Oil impregnatedBearings Fe C Chemical Composition (%) Cu Sn Ni Pb Zn Others Density (g/cm3) Oil Content(VOL. %) Physical Ultimate Tensile Strength (kg/mm2) Mechanical Properties Elongation(%) Radial Crushing Strength (kg/mm2) Hardness - ● – – – 77~88 – – 1~2 bal < 1.0 4040 4040HT 5030 5030HT ● – bal ● – bal ● – bal ● – bal - ● – Bal Application 0.4~0.8 0.3~0.6 0.4~1.0 0.3~0.6 0.4~1.0 0.3~0.6 0.3~0.8 – – – – – < 1.0 1~3 – – – – < 1.0 6.8 – 50 1.0 – 1~3 – – – – < 1.0 6.8 – 60 0.2 – MHV450 Min 1~2.5 – 1~5 Mo0.5 – < 1.0 6.8 – 40 1.0 – 1~2.5 – 1~5 1~2.5 – 2~8 8~14.9 – – – – < 4.0 Mo0.5 Mo0.5 – < 1.0 6.8 – 80 0.3 – MHV450 Min – < 1.0 6.4~6.8 7.6~8.0 6.8 Min 5.6~6.4 6.6 18 Min 8 2 15 Min – 15 10 – – 20 5 – 18 Min 15 1.0 20 Min – 30 0.5 – 6.8 Min 7.2 Min – 40 1.0 – – 60 2.0 – RH30~70 RH75 RB20 RH30~70 RB40 RB40 RB60 RB70 RB80 < 規 格 二 - 不銹鋼 > Chemical Composition (%) Type Physical Mechanical Properties Ultimate Tensile Strength Fe Cr Ni Cu Tin Si Mn Mo C S Other Density(g/cm3) Elong-ation(%) Hard-ness (kg/mm2) SUS303LSC bal 18.2 12.5 2.0 1.0 0.8 0.13 – 0.20 < 1.0 0.08 < > 6.3 20 Min. Min.2.0 RB40 < SUS316LSC bal 17.0 13.5 2.0 1.0 0.75 0.12 2.2 0.01 < 1.0 0.08 SUS410L > 6.3 25 Min. Min.5.0 RB38 bal 12.7 – – – 0.8 0.18 – 0.01 < 1.0 0.08 < > 6.3 20 Min. Min.2.0 RB80 本文来源：https://www.wddqw.com/doc/49b5af3b6ddb6f1aff00bed5b9f3f90f76c64de1.html