利用激光细度仪快速检测棉纤维细度的探究 刘天骄;孙润军;王红红 【期刊名称】《棉纺织技术》 【年(卷),期】2018(46)3 【摘 要】为了解决传统棉纤维线密度测量方法效率低、稳定性差的问题,探讨采用激光细度仪对棉纤维进行测量,并选用经典线密度测量方法-中段切断法验证激光法的准确性.选择6种不同马克隆值的棉样进行测试,利用激光细度仪得到投入样品的有效根数和平均直径,并结合线密度的定重制计算出棉样的平均线密度.与中段切断称重法测得的线密度值进行对比,发现细度仪结果比中段切断称重法的稳定性要差,其中对于较低马克隆值棉样两者没有明显差异.认为:细度仪得到的平均直径、根数和马克隆值,与中段法结果进行线性拟合,并通过新样品验证回归方程的准确性,两种方法具有一定的线性相关性.%In order to solve the problem of lower efficiency and poorer stability of traditional cotton fiber line-ar density measurement method,adopting the laserscan to measure the cotton fiber and using the classical linear density measurement to verify the accuracy of the laser method were discussed.The cotton samples with 6 differ-ent micronaire values were tested.The effective number and average diameter of the input samples were obtained by the lasersacn.And the average linear density of the cotton sample was calculated with the constant weight sys-tem of linear density.Compared with the line density measured by cut-middles method,the stability of test result using the lasersacn was worse than that of cut-middles method,and there was no significant difference between the samples with lower micronaire value.It is considered that the average diameter,number and micronaire value tested by the lasersacn are linearly fitted with the results of cut-middles method,and the accuracy of the regres-sion equation is verified by the new samples.The two methods have a certain linear correlation. 【总页数】4页(P78-81) 【作 者】刘天骄;孙润军;王红红 【作者单位】西安工程大学,陕西西安,710048;西安工程大学,陕西西安,710048;西安工程大学,陕西西安,710048 【正文语种】中 文 【中图分类】TS101.92+1.2 【相关文献】 1.利用光学纤维直径分析仪对辽宁绒山羊纤维细度的测量 [J], 佟瑞宏 2.影响激光细度仪测定羊毛纤维细度准确性的因素探讨 [J], 傅科杰;姜琴元;冯云;杨力生 3.采用纤维细度仪进行麻/棉混纺产品定量分析技术的探讨 [J], 郭荣幸;程珊 4.激光仪法测定兔毛纤维细度可行性研究 [J], 翟频;杨杰;朱满兴 5.激光干涉式纤维细度测试仪及其应用 [J], 王彩霞 因版权原因，仅展示原文概要，查看原文内容请购买 本文来源：https://www.wddqw.com/doc/6ec32940497302768e9951e79b89680203d86bd0.html