自行车手闸套手刹套刹车套测试报告模板-RIM BRAKE SET
说明：文章内容仅供预览，部分内容可能不全。下载后的文档，内容与下面显示的完全一致。下载之前请确认下面内容是否您想要的，是否完整无缺。
XXXXX XXXXX XX Co., Ltd TEST REPORT 说明：本测试报告是我们根据自行车相关标准整理的报告模板，所有工厂或者实验室都可以借鉴使用，可以节省很多时间，因为编制一份模板还是比较难的，很费时间。这个下载过去，调整一下数据，修改一下公司名称、地址、报告编号、报告日期、产品名称、产品型号、商标、签发日期，这些都修改一下，就可以直接使用，报告的格式我们都按照正规测试报告的格式处理好了，下载即可使用。 INSPECTION NUMBER：2019121806-22 TEST DATE：2019-12-18 PRODUCT NAME：RIM BRAKE SET PRODUCT MODEL：XXX BRAND：XXXX PRODUCTION FACTORY：XXXXX XXXXX XX Co., Ltd PRODUCTION STANDARD：QB/T1891-2012 TEST ITEM STANDARD Testing requirements Breaking force test Locking performance test Brake band strength test QB/T1891-2012 Stretching speed is not greater than 20mm/min Stretching speed is not greater than 20mm/min Stretching speed is not greater than 20mm/min 1.After the tensile test with the force of 5000n, the brake belt and the RESULT 11mm/min Verdict PASS QB/T1891-2012 14mm/min PASS QB/T1891-2012 12mm/min PASS SECURITY TEST QB/T1891-2012 Static braking performance connection at both ends of the brake belt shall not be damaged. 2.After applying 10J impact force to the brake handle, the brake handle shall not be damaged or broken. 3.The breaking force of the Meet the joint assembly of steel rope requirements and steel rope must be greater than 1500N. 4.The breaking force of the upper and lower joint assemblies of the rear pulling tube and the pulling tube must be greater than 2000N. 5.The rope shall not slide under the action of 1000N tension, and the locking performance of the rope must meet the requirements. QB/T1891-2012 Test load：200F/N， 46N Static braking torque：＞40N After 5000 durability tests, the brake system and its parts shall not be damaged or broken. It shall not fall off or deform ＜70（dB） ＜0.3mm 0.1mm Meet the requirements PASS PASS PASS Brake durability QB/T1891-2012 Brake noise Radial circular jump QB/T1891-2012 QB/T1891-2012 43（dB） PASS PASS PASS The mounting screws on the front fork and handlebar Meet the Screw reliability QB/T1891-2012 shall be equipped with requirements suitable locking devices, such as locking rings and nuts. After 10000 times of fatigue Fatigue strength test, the joint of Meet the strength of QB/T1891-2012 steel wire rope shall not fall requirements assembly off and each steel wire rope shall not break. The appearance quality, coating thickness, surface Electroplating QB/T1891-2012 roughness and corrosion Meet the PASS resistance of chromium plated parts shall meet the requirements of relevant standards. The appearance quality, impact strength and Paint quality QB/T1891-2012 corrosion resistance of the paint film shall meet the requirements of relevant standards. The appearance quality, Powder coating impact strength and quality QB/T1891-2012 corrosion resistance of powder coating shall meet the requirements of relevant standards. A. There shall be no rust spot, crack, scar and other Other obvious defects on the appearance QB/T1891-2012 surface of the brake, quality B. There shall be no sharp angle, flash, burr on the handle and all parts of the brake body, C. The trademark mark shall be clear and complete, without color difference, dislocation or obvious defects. quality requirements PASS Meet the requirements PASS Meet the requirements PASS Meet the requirements PASS RESULT: as per each standard, the result is QUALIFIED. TESTER： checker： authorized： Date of issue：2019-12-18 本文来源：https://www.wddqw.com/doc/39f360cc30b765ce0508763231126edb6e1a76c6.html