说明：本测试报告是我们根据自行车相关标准整理的报告模板，所有工厂或者实验室都可以借鉴使用，可以节省很多时间，因为编制一份模板还是比较难的，很费时间。这个下载过去，调整一下数据，修改一下公司名称、地址、报告编号、报告日期、产品名称、产品型号、商标、签发日期，这些都修改一下，就可以直接使用，报告的格式我们都按照正规测试报告的格式处理好了，下载即可使用。 XXXXX XXXXX XX Co., Ltd TEST REPORT INSPECTION NUMBER：2019121806-10 TEST DATE：2019-12-18 PRODUCT NAME：Bicycle LOCK PRODUCT MODEL：XXX BRAND：XXXX PRODUCTION FACTORY：XXXXX XXXXX XX Co., Ltd PRODUCTION STANDARD：QB/T1001-2006 TEST ITEM STANDARD Key tooth flower QB/T1001-2006 Testing requirements ≥5 RESULT 5 Verdict PASS InteroperabilitQB/T1001-2006 y ratio ≤0.327 % 0.10% PASS Lock head The lock head QB/T1001-2006 Meet the anti pulling structure shall have safety device at least one anti requirements pulling safety device After the bullet lock Anti knock Meet the has passed the anti open test QB/T1001-2006 knock opening test in requirements 6.1.6, the lock cannot be opened The key angle of the Keep key QB/T1001-2006 bullet lock shall not 17° angle be less than 15° Durability QB/T1001-2006 Service life not less than 4000 times Static pulling QB/T1001-2006 force Closing force QB/T1001-2006 Surface ≤8N ≤34N Meet the requirements 1N 12 PASS PASS PASS PASS PASS PASS The surface of lock Meet the body shall be smooth quality of lock QB/T1001-2006 and free from sharp requirements PASS angle, sharp edge and obvious burr body damage. The surface of lock Lock key key shall be flat and surface QB/T1001-2006 smooth without edge Meet the collapse. The trademark, quality requirements PASS handwriting and pattern should be clear The surface of Surface electroplated layer shall be firm, uniform quality of electroplated coating Coating surface Corrosion resistance Coating adhesion QB/T1001-2006 and bright, and there Meet the shall be no blistering, delamination and requirements bottom exposure. PASS The coating surface shall be uniform in QB/T1001-2006 color and free from blistering and falling off. ≥Level 4 ≥Level 2 Meet the requirements Level 4 Level 2 PASS PASS PASS QB/T1001-2006 QB/T1001-2006 RESULT: as per each standard, the result is QUALIFIED. TESTER：： checker： authorized： Date of issue：2019-12-18 本文来源：https://www.wddqw.com/doc/fae17f6f51e2524de518964bcf84b9d529ea2ce4.html