The update to version 15.84 incorporates the following changes: 15.84版本更新包含以下内容： Features: 新增功能： 1. The GSHEAR option has been added to the MOM dialog, so you can easily add those operands to your AANT file. MOM对话框新增GSHEAR选项。这样易于您将这些操作数添加到AANT文件中。 2. New operands IHH and IZZ will target the tangent of the incident angle of the requested ray. This is for when you want the object rays telecentric. 新操作数IHH和IZZ表示物和表面1之间的所需光线的入射角的正切。当您想要物方光线远心时，可使用它们。 Bugs Fixed: 修复漏洞： 1. SPB crashed if you entered the SPECIAL input. Also, the stopsign button did not work. 修复了当您在SPECIAL进行输入时SPB程序崩溃的漏洞。也修复了停止按钮作用的漏洞。 不起2. The ZSEARCH program left out one "END" line in the optimization MACro if you requested AGROUP. Also, if less than 10 solutions were found, there were duplicates shown on the plot. 修复了当您在ZSEARCH程序中输入AGROUP命令时，生成的优化宏MACro中会遗漏了 “END”命令行的漏洞。也修复了如果找到的解决方案少于10个，则在图中会显示重复的镜头结构的漏洞。 3. The ATC monitor did not work on cemented elements. 修复了ATC监视器对胶合元件不起作用的漏洞。 4. AEI did not work correctly if switch 99 was on. 修复了在打开开关99时AEI不能正常工作的漏洞。 5. GSEARCH did not work correctly in multicore mode. 修复了GSEARCH不能在多核模式下正常工作的漏洞。 Issues: 1. We have observed that if you turn on switch 99 (enabling multicore optimization, which is recommend for slow jobs but not for fast ones), and if the number of cores authorized (via C99) exceeds 16, the Windows operating system can become unstable. We are investigating the cause of this behavior, and until it is resolved, you are advised to stay within the 16-core limit for that feature. 问题： 1. 我们已经观察到：如果您打开开关99（启用多核优化，建议用于慢速设计而不是快速设计），并且如果授权的内核数（通过C99授权）超过16，Windows操作系统可能会变得不稳定。我们正在调查此原因，在解决这个问题之前，建议您使用受限的16核。 本文来源：https://www.wddqw.com/doc/d6f720ab2f3f5727a5e9856a561252d381eb20f9.html